From anders at brander.dk  Mon Sep 15 21:49:22 2008
From: anders at brander.dk (Anders Brander)
Date: Mon, 15 Sep 2008 21:49:22 +0200
Subject: [Rawstudio-users] Rawstudio 1.1 released
Message-ID: <1221508162.20239.1.camel@smutogtab>

Hi,

This release adds the much needed EXIF-awareness! We have added support
for a lot of new cameras and the usual truckload of bugfixes.

Thanks to everybody who has contributed in any way.

Available at the usual place:
http://rawstudio.org/files/release/

/abrander




From wesleong at yahoo.com  Thu Sep 18 06:46:35 2008
From: wesleong at yahoo.com (Wes Leong)
Date: Wed, 17 Sep 2008 21:46:35 -0700 (PDT)
Subject: [Rawstudio-users] segmentation fault?
Message-ID: <933235.11068.qm@web31701.mail.mud.yahoo.com>

I don't know if this is the right place to post this, but I can get rawstudio to crash consistently. If I select multiple thumbnails, and add it to the batch queue, and then double click a directory under the "Open" Tab, rawstudio gives a segmentation fault (Error message below). I just installed version 1.1, but I still have the 1.0 binary, and it both versions seem to exhibit the same behavior. Anyone else noticing this?
-Wes


(rawstudio:25935): Gtk-CRITICAL **: gtk_list_store_get_value: assertion `VALID_ITER (iter, list_store)' failed

(rawstudio:25935): GLib-GObject-WARNING **: gtype.c:3339: type id `0' is invalid

(rawstudio:25935): GLib-GObject-WARNING **: can't peek value table for type `<invalid>' which is not currently referenced
Segmentation fault


      


From anders at brander.dk  Thu Sep 18 11:45:39 2008
From: anders at brander.dk (Anders Brander)
Date: Thu, 18 Sep 2008 11:45:39 +0200
Subject: [Rawstudio-users] segmentation fault?
In-Reply-To: <933235.11068.qm@web31701.mail.mud.yahoo.com>
References: <933235.11068.qm@web31701.mail.mud.yahoo.com>
Message-ID: <1221731139.5818.8.camel@video64>

Hi Wes,

On Wed, 2008-09-17 at 21:46 -0700, Wes Leong wrote:
> I don't know if this is the right place to post this, but I can
> get rawstudio to crash consistently. If I select multiple
> thumbnails, and add it to the batch queue, and then double click
> a directory under the "Open" Tab, rawstudio gives a segmentation
> fault (Error message below). I just installed version 1.1, but I
> still have the 1.0 binary, and it both versions seem to exhibit
> the same behavior. Anyone else noticing this?

I can confirm this, but it's even simpler to make it crash.

1. Start Rawstudio.
2. Open a directory.
3. Select multiple thumbnails.
4. Double click on another directory in the "Open"-tab.
5. PUF!

Somebody (me) should take a look at this.

/abrander




From yves.martelle at orange.fr  Mon Sep 29 20:44:23 2008
From: yves.martelle at orange.fr (Yves Martelle)
Date: Mon, 29 Sep 2008 20:44:23 +0200
Subject: [Rawstudio-users] Loss of contrast & saturation settings since
 upgrade to Rawstudio 1.1
Message-ID: <48E12207.9070506@orange.fr>

Hello all,

Just upgraded to Rawstudio 1.1 some days ago to take advantage of new 
Exif features. One problem that I have noticed since I moved to 1.1 : 
all settings applied to raw files on saturation & contrast seem to have 
been lost, and all values have been reset to 1. Even when I change the 
value in Rawstudio, switch to another picture, and then back to the 
original one, values for saturation & contrast are reset to 1, Rawstudio 
has become unusable for me.

Any idea ? Am I the only one experiencing this ? What are the options 
apart from rolling back to 1.0 ?

Thanks for your help !

Yves.



From anders at brander.dk  Mon Sep 29 21:09:05 2008
From: anders at brander.dk (Anders Brander)
Date: Mon, 29 Sep 2008 21:09:05 +0200
Subject: [Rawstudio-users] Loss of contrast & saturation settings
	since	upgrade to Rawstudio 1.1
In-Reply-To: <48E12207.9070506@orange.fr>
References: <48E12207.9070506@orange.fr>
Message-ID: <1222715345.23713.5.camel@smutogtab>

Hi,

On Mon, 2008-09-29 at 20:44 +0200, Yves Martelle wrote:
> Just upgraded to Rawstudio 1.1 some days ago to take advantage of new 
> Exif features. One problem that I have noticed since I moved to 1.1 : 
> all settings applied to raw files on saturation & contrast seem to have 
> been lost, and all values have been reset to 1. Even when I change the 
> value in Rawstudio, switch to another picture, and then back to the 
> original one, values for saturation & contrast are reset to 1, Rawstudio 
> has become unusable for me.

This is a known issue - and fixed in current development tree.
http://bugzilla.rawstudio.org/show_bug.cgi?id=227

> Any idea ? Am I the only one experiencing this ? What are the options 
> apart from rolling back to 1.0 ?

Three options:
A) Roll back to 1.0.
B) Wait for 1.1.1 - will be released shortly.
C) Use one of the daily builds.

Unless you're very adventurous, I would recommend option B.

> Thanks for your help !

Thanks for your feedback.

/abrander